important Info: These new valid Cisco 642-832 exam questions were updated in recent days by Cisco 642-832,please visit our website to get the full version of new Cisco 642-832 exam dumps with free version of new VCE Player, you can pass the exam easily by training it!
QUESTION 21
Following ticket consists of a problem description and existing configuration on the device.
CertKiller.com
“Slay Your Exams” – www.certkiller.com 24 Cisco 642-832: Practice Exam
Figure 1 Figure 2
Trouble Ticket Statement
Client 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that DSW1, DSW2 and all the routers are able to reach the WebServer “Slay Your Exams” -www.certkiller.com 25 Cisco 642-832: Practice Exam
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload ! ip access-list standard nat_pool permit 10.1.0.0 ! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ! interfaceSerial0/0/0/0.12 ip address 10.1.1.1 255.255.255.252 ip nat inside ip ospf message-digest-key 1 md5 TSHOOT ip ospd authentication message-digest
On Which device isthe fault condition located?
100% valid Cisco300-320 brain dumps with more new added questions.By training the Cisco300-320 questions, you will save a lot time in preparing the exam.Visit www.Flydumps.com to get the 100% pass ensure!
QUESTION 5
5) Client 1 is not able to ping the server
Situation 5: Unable to ping R4 fast ethernet port from DSW1 and check ip eigrp neighbors from
DSW1 u willnot c R4 as neighbor.(use ipv4 Layer 3)
A. R4
B. IP4 EIGRP
C. Change eigrp process no: from 1 tp 10 on R4 according to the configuration on DSW1 and DSW2
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference: DSW1 can ping 10.1.4.5 >>> connected route DSW1 can’t ping 10.1.4.9 interface of R4>>> because of wrong EIGRP process number
QUESTION 6
6) Client 1 is not able to ping the server
A. R4
B. route redistribution
C. change the name of the route-map under the router EIGRP process from “EIGRP_to_OSPF” to ”EIGRP->OSPF”
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference: R4(config)# router eigrp 10 R4(config-router)#redistribute ospf 1 route-map EIGRP_to_OSPF
BUT route-map was named: route-map EIGRP->OSPF R4 has route map to redistribute between EIGRP and OSPF…but in the name of the route map under EIGRP redistribution does no match the name of the route map so the answer is to delete the redistribution command under EIGRP (the one with the wrong route map name) and replace it with the redistribution command with the right route map name.
Cisco 642-832 Demo Free Download, 100% Pass Cisco 642-832 Questions With High Quality
important Info: These new valid Cisco 642-832 exam questions were updated in recent days by Cisco 642-832,please visit our website to get the full version of new Cisco 642-832 exam dumps with free version of new VCE Player, you can pass the exam easily by training it!
QUESTION 21
Following ticket consists of a problem description and existing configuration on the device.
CertKiller.com
“Slay Your Exams” – www.certkiller.com 24 Cisco 642-832: Practice Exam
Figure 1 Figure 2
Trouble Ticket Statement
Read MoreClient 1 and Client 2 are not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that DSW1, DSW2 and all the routers are able to reach the WebServer “Slay Your Exams” -www.certkiller.com 25 Cisco 642-832: Practice Exam
Configuration on R1
ip nat inside source list nat_pool interface Serial0/0/0/1 overload ! ip access-list standard nat_pool permit 10.1.0.0 ! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ! interfaceSerial0/0/0/0.12 ip address 10.1.1.1 255.255.255.252 ip nat inside ip ospf message-digest-key 1 md5 TSHOOT ip ospd authentication message-digest
On Which device isthe fault condition located?
Cisco300-320 Study Material, Most Popular Cisco300-320 Practice Test Online Store
100% valid Cisco300-320 brain dumps with more new added questions.By training the Cisco300-320 questions, you will save a lot time in preparing the exam.Visit www.Flydumps.com to get the 100% pass ensure!
QUESTION 5
5) Client 1 is not able to ping the server
Situation 5: Unable to ping R4 fast ethernet port from DSW1 and check ip eigrp neighbors from
DSW1 u willnot c R4 as neighbor.(use ipv4 Layer 3)
A. R4
Read MoreB. IP4 EIGRP
C. Change eigrp process no: from 1 tp 10 on R4 according to the configuration on DSW1 and DSW2
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference: DSW1 can ping 10.1.4.5 >>> connected route DSW1 can’t ping 10.1.4.9 interface of R4>>> because of wrong EIGRP process number
QUESTION 6
6) Client 1 is not able to ping the server
A. R4
B. route redistribution
C. change the name of the route-map under the router EIGRP process from “EIGRP_to_OSPF” to ”EIGRP->OSPF”
Correct Answer: ABC Section: (none) Explanation
Explanation/Reference: R4(config)# router eigrp 10 R4(config-router)#redistribute ospf 1 route-map EIGRP_to_OSPF
BUT route-map was named: route-map EIGRP->OSPF R4 has route map to redistribute between EIGRP and OSPF…but in the name of the route map under EIGRP redistribution does no match the name of the route map so the answer is to delete the redistribution command under EIGRP (the one with the wrong route map name) and replace it with the redistribution command with the right route map name.