Welcome to download the newest Pass4itsure sk0-003 VCE dumps: http://www.pass4itsure.com/sk0-003.html
Once you’re completed along with the practicing, and then start off up with all the Cisco 350-080 exam sample questions of your respective selection. It up to date edition of Cisco 350-080 practicing will keep you up to date towards the newest model in the test. Cisco 350-080 exam sample questions would be the crucial equipment that assist the candidates in passing his or her test over normal. Acquire your time, to go as a result of and review the issues and lab scenarios in every chapter getting notes as you go. In the event you’re having an actual difficulty in staying encouraged to examine you then’re not alone.
QUESTION 1
FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)
A. FabricPath provides MAC address scalability with conversational learning
B. Loop mitigation with TTL in the frame field
C. STPl independence
D. 10 Gbps bandwidth
E. Layer 2 extensions between data centers
Correct Answer: ABC
QUESTION 2
A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on, but the interfaces are all in VDC0. What is the reason for this?
A. The chassis needs an EPLD upgrade to support the new module type.
B. The default VDC cannot support F2 modules.
C. The interfaces must be allocated into a VDC for F2 modules only.
D. The module has failed GOLD diagnostics, and the switch has isolated the ports to protect the integrity of the system.
Correct Answer: C
QUESTION 3
Which two statements about SAN port channels configured on Cisco Nexus 5000 Series switches are true? (Choose two.)
A. The bring up protocol automatically detects and overrides any misconfiguration.
B. You can manually configure channel groups, or they can be automatically created.
C. Changes in configuration to the SAN port channel interface must also be made to all members of the channel group.
D. The port channel protocol uses the exchange fabric parameters command to communicate across peer ports in an ISL.
E. The port channel protocol ensures that a set of ports is eligible to be part of the same SAN port channel.
Correct Answer: BE
QUESTION 4
Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core? (Choose three.)
A. virtualization
B. unified I/O
C. support for 48-port Gb/s line card
D. support for Data Center Service Modules
E. high performance
F. high availability
Correct Answer: BEF
QUESTION 5
Which statement about Cisco Unified Fabric switches is correct?
A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.
C. The Nexus 7000 Series Switches can support the NPIV mode of operation, but cannot function as a complete Fibre Channel Forwarder.
D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
Correct Answer: E
QUESTION 6
Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true?
A. A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces.
B. SAN port channels can include up to 16 interfaces.
C. SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used.
D. The links in SAN port channels can be connected to different sets of switches.
E. The On mode of operation means ports only operate as part of a SAN port channel or remain inactive.
Correct Answer: E
QUESTION 7
Which capabilities are not supported in DCNM device manager?
A. manage SNMPv3 security access to switches
B. save and copy configuration files and software images
C. configure VLANs and Ethernet port channels
D. manage 2148T FEX, 2232PP FEX, and 2248TP FEX
E. configure FCoE
Correct Answer: C
QUESTION 8
What is the use of NPV in Cisco Unified Computing Systems? (Choose two.)
A. Compatibility with third-party Fibre Channel switches
B. Faster throughput
C. Reduce domain IDs in a Fibre Channel environment
D. Support for increased number of VSANs
E. Support for SAN port channels
Correct Answer: AC
QUESTION 9
If the default VDC is configured to limit resources to a specific module type, what happens when a module that does not match the resource type is installed?
A. The module is powered up, and interfaces are in an “admin down” state.
B. The module is denied power, and a syslog message is generated.
C. The module is powered up, and interfaces are allocated to VDC0.
D. The module is powered up, and interfaces are allocated to VDC100.
Correct Answer: C
QUESTION 10
What is the mechanism that is used to allocate MAC addresses that are assigned to the VDC for the system MAC address?
A. NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco.
B. The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness.
C. NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane.
D. The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch.
Correct Answer: C
QUESTION 11
Which three flow-control port states lead to enabled link flow control? (Choose three.)
A. Receive port: Enabled, Transmit port: Enabled
B. Receive port: Enabled, Transmit port: Desired
C. Receive port: Enabled, Transmit port: Disabled
D. Receive port: Disabled, Transmit port: Desired
E. Receive port: Desired, Transmit port: Desired
Correct Answer: ABE
QUESTION 12
In a configuration with redundant supervisors, how many IP addresses are required to configure full remote access via management 0?
A. Two IP addresses, one for each supervisor
B. Three IP addresses, one virtual IP and one physical IP for each supervisor
C. One IP address that is shared among supervisors
D. None–management 0 will use the IP address from the first SVI that is created
Correct Answer: C
QUESTION 13
VLAN configuration using DCNM can be completed by which two supported methods? (Choose two.)
A. Copy and paste the VLAN, along with its VLAN ID, name, type, admin state, and admin status, from one device to another.
B. Create a single VLAN or a range of VLANs.
C. A VLAN is created only after choosing File > Deploy to apply changes.
D. After a VLAN is created, it requires the state to be enabled.
E. Modify the existing VLAN by choosing Interface > VLAN > VLAN Settings.
Correct Answer: AB
QUESTION 14
Enabling jumbo frame support on a Cisco Nexus 5500 Switch can be done through which method?
A. Changing the default policy map from a default MTU of 1500 to 9216
B. Using the command system jumbomtu 9216
C. Using the command interface MTU 9216
D. Configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map
Correct Answer: D
QUESTION 15
Which two statements about authentication settings for DCNM-LAN are true? (Choose two.)
A. If none of the authentication servers that are configured for the current authentication mode responds to an authentication request, the DCNM-LAN server falls back to local authentication.
B. DCNM-LAN only supports TACACS+.
C. Each DCNM-LAN server will have the same device credentials.
D. Administering DCNM-LAN authentication settings requires an authentication license.
E. DCNM-LAN server users are local to the DCNM-LAN server.
Correct Answer: AE
QUESTION 16
DCNM is capable of monitoring the network performance of a SAN. What are the three primary areas of this operation?
A. Analyze traffic, device management, and network monitoring
B. DCNM-SAN, DCNM-LAN, and device manager
C. Definition of flows, information collection, and data presentation
D. SNMP poll data, MIB analysis, and report generation
Correct Answer: C
QUESTION 17
What is required for proper implementation of jumbo frame support on a Cisco Nexus 2000 Series Fabric Extender?
A. The interface configured as FEX fabric requires the MTU to be set to jumbo.
B. The service policy must be applied to the system QoS.
C. The device defaults to jumbo frame support; no changes are required.
D. The switchport in the FEX interface must be set to MTU 9216.
Correct Answer: B
QUESTION 18
DCNM device discovery is done by connecting to Cisco NX-OS devices and doing which three of these? (Choose three.)
A. Collecting the running configuration
B. Raising the logging level to meet the minimum requirement
C. Discovering all devices by default
D. Discovering devices using multiple user accounts as long as they are administrator-level accounts
E. Using LLDP to discover network adaptors
Correct Answer: ABE
QUESTION 19
You can install Cisco DCNM-LAN on a supported version of which two operating systems? (Choose two.)
A. Microsoft Windows Server
B. Novell SUSE Linux Enterprise Server
C. Oracle Enterprise Linux
D. Red Hat Enterprise Linux
E. VMware ESX
Correct Answer: AD
QUESTION 20
Cisco DCNM-LAN supports the configuration and monitoring of many Cisco NX-OS features, including which two of these Ethernet protocols? (Choose two.)
A. GLBP
B. HSRP
C. IRDP
D. VRRP
Correct Answer: AB
QUESTION 21
The vPC peer-gateway capability allows a vPC switch to act as the active gateway for packets that are addressed to the router MAC address of the vPC peer. This feature enables local forwarding of such packets without the need to cross the vPC peer link. Which statements are true about the vPC peer-gateway? (Choose two.)
A. The vPC peer-gateway feature is enabled by default.
B. The vPC peer-gateway feature can be configured globally under the vPC domain submode.
C. Enabling the peer-gateway feature automatically disables IP redirects on all interface VLANs mapped over a vPC VLAN to avoid generation of IP redirect messages for packets switched through the peer gateway router.
D. The vPC peer-gateway feature only works with HSRP protocol.
Correct Answer: BC
QUESTION 22
Cisco UCS provides integration interfaces and protocols to support heterogeneous data center environments and supports standard monitoring and event notification systems, providing data to standard enterprise-management tools.
Which two of these list the primary Cisco UCS interfaces and industry standard-based read-only interfaces? (Choose two.)
A. UCS Manager XML API and UCS CLI
B. SNMP, SMASH CLP, and CIM-XML
C. UCS Manager, DCOS, and Local-mgmt
D. SoL and NX-OS
E. debug-plugin and UCS Manager GUI
Correct Answer: AB
QUESTION 23
A virtual port channel (vPC) allows links that are physically connected to two different Cisco Nexus devices to appear as a single port channel to a third device.
Which are the mandatory steps for configuring vPC? (Choose six.)
A. Enable feature vPC
B. Define domains
C. Establish peer keepalive connectivity
D. Create a peer link
E. Configure the peer link as a trunk port
F. Create port channels and vPCs
G. Define port channel load-balancing method
H. Make sure configurations are consistent
Correct Answer: ABCDFH QUESTION 24
When creating a role in a Cisco Nexus 7000 Series Switch, rules are used to define the type of operations that a role will allow the user to perform. Which two of these parameters cannot be applied as a rule? (Choose two.)
A. port-profile
B. command
C. access-list
D. feature-group
E. OID
Correct Answer: AC QUESTION 25
Overlay Transport Virtualization (OTV) overlay interface is a logical multiaccess and multicast- capable interface that must be explicitly defined by the user and where the entire OTV configuration is applied.
Which statements are true about OTV overlay interface? (Choose two.)
A. When an OTV edge device receives a Layer 2 frame destined for a remote data center site, the frame is logically forwarded to the overlay interface.
B. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the join interface toward the routed domain.
C. When the OTV edge device receives a Layer 2 frame destined for a remote data center site, the frame is logically forwarded to the join interface.
D. The OTV edge device performs the dynamic OTV encapsulation on the Layer 2 packet and sends it to the overlay interface toward the routed domain.
Correct Answer: AB QUESTION 26
Refer to the exhibit.
The network administrator is seeing N7K-1 having issues with VLAN 11, and interface VLAN 11 is resetting, causing frequent HSRP state changes. Which two actions would reduce HSRP state changes? (Choose two.)
A. On N7K-1, configure the HSRP extended hold timer to 180, extending the HSRP hello message hold time.
B. On N7K-2, configure the HSRP extended hold timer to 180, extending the HSRP hello message hold time.
C. On N7K-1, configure the pre-empt delay minimum to 180 in order to delay N7K-1 from taking over as the HSRP active router.
D. On N7K-2, configure the pre-empt delay minimum to 180 in order to delay N7K-2 from taking over as the HSRP active router.
E. On N7K-2, increase the HSRP priority to 150.
F. On N7K-2, decrease the HSRP priority to 50.
Correct Answer: CE
QUESTION 27
Overlay Transport Virtualization (OTV) join interface is used to source the OTV encapsulated traffic and send it to the Layer 3 domain of the data center network. Which statements are true about OTV join interface? (Choose three.)
A. Join interface is a Layer 3 entity, and with the Cisco NX-OS release 6.0, it can only be defined as a physical interface, physical subinterface, Layer 3 port channel, or Layer 3 port channel subinterface.
B. A single join interface can be defined and associated with a given OTV overlay.
C. Multiple overlays can also share the same join interface.
D. Join interface can be a loopback interface.
E. The join interface is a Layer 3 entity that can be defined as a physical interface but not as a logical one.
Correct Answer: ABC
QUESTION 28
Cisco NX-OS Software supports SNMPv1, SNMPv2c, and SNMPv3. Both SNMPv1 and SNMPv2c use a community-based form of security. SNMPv3 provides secure access to devices by a combination of authenticating and encrypting frames over the network. Which security features are provided in Cisco NX-OS SNMPv3? (Choose three.)
A. encryption–scrambles the packet contents to prevent them from being seen by unauthorized sources
B. password–a password (community string) sent in clear text between a manager and agent for added protection
C. authentication–determines that the message is from a valid source
D. message integrity–ensures that a packet has not been tampered with while it was in transit
E. user–to determine if user authentication is used instead of community strings
Correct Answer: ACD
QUESTION 29
The hardware and software configurations for vPC+ are similar to that of traditional vPC. What are the differences in the configuration of vPC+? (Choose three.)
A. FabricPath switch ID must be configured under the vPC domain.
B. Virtual switch ID of vPC+ must be configured under FabricPath domain.
C. On Cisco Nexus 7000 Series Switch, F1 interfaces must be used as the vPC+ peer links.
D. The vPC+ peer link must be configured as a Cisco FabricPath core port (switchport mode fabricpath).
E. FabricPath subswitch ID must be configured under the vPC domain.
Correct Answer: ACD
QUESTION 30
Smart Call Home provides an email-based notification for critical system policies. A range of message formats are available for compatibility with pager services, standard email, or XML- based automated parsing applications. Destination profiles are used by Smart Call Home when sending notifications. Which of these are predefined destination profiles supported by Cisco NX-OS Software? (Choose three.)
A. short-text-destination
B. prerecorded audio alerts
C. CiscoTAC-1
D. dial911
E. full-text-destination
Correct Answer: ACE
QUESTION 31
After configuring FabricPath, the following appears in the syslog:
%STP-2-L2GW_BACKBONE_BLOCK: L2 Gateway Backbone port inconsistency blocking port port-channel100 on VLAN0010. What is the cause of this message?
A. STP must be disabled; message indicates that STP is enabled.
B. STP is misconfigured; root guard must be disabled.
C. An inferior BPDU is received on a Cisco FabricPath edge port.
D. A superior BPDU is received on a Cisco FabricPath edge port.
Correct Answer: D
QUESTION 32
Which description is correct for a private VLAN community port with respect to Layer 2 communications?
A. It communicates with all other community ports in the private VLAN domain.
B. It communicates with only isolated ports in the private VLAN domain.
C. It communicates only with other community ports in the same community and associated promiscuous ports.
D. It communicates only with associated promiscuous and isolated ports.
Correct Answer: C
QUESTION 33
On Cisco Nexus 7000 Series Switch Cisco FabricPath domain, one switch becomes the root for the multidestination tree. Cisco FabricPath IS-IS will automatically select root switches for each multidestination tree. One of the parameters used to select the root is system ID. Which statements are true about system ID? (Choose two.)
A. System ID is a unique 12-bit SID.
B. System ID is a 48-bit value composed of the VDC MAC address.
C. Higher system ID is preferred.
D. Lower system ID is preferred.
Correct Answer: BC
Free practice questions for Cisco 350-080 exam.These questions are aimed at giving you an idea of the type of questions you can expect on the actual exam.You will get an idea of the level of knowledge each topic goes into but because these are simple web pages you will not see the interactive and performance based questions – those are available in the Cisco 350-080.
Pass4itsure sk0-003 dumps with PDF + Premium VCE + VCE Simulator: http://www.pass4itsure.com/sk0-003.html
Cisco 350-080 Practice, Sale Latest Cisco 350-080 Certification Exam Is What You Need To Take